Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 115

Page: 115 / 204

►

Performing a Factory Reset

This feature restores the matrix to original factory-default settings.

1. Click the

Reset

button.

2. The following message box will be displayed:

► Click the

button to continue with the reset procedure.

► Click the

Cancel

button to abort the reset procedure and return

to the web interface.

page | 103

asic Oper

ation

The Web Interface

Important

Performing this function will erase all current setting in your matrix. IP settings

will be retained. To save the configuration, before continuing, refer to the

section

Download Current Configuration to PC.

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands