Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 5

Page: 5 / 204

•

There is no internal scaling in the 4K Ultra HD Matrix for HDMI. All of the attached

monitors must be able to display the resolutions output by the source devices.

For maximum compatibility it is recommended that only one compatible / common

resolution be used by all of the source devices.

•

The Gefen Syner-G Software Suite is a free downloadable application from Gefen

that provides automatic download and installation of firmware upgrades as well as

effortless network configuration for this product.

Download the application here:

http://www.gefen.com/synerg/

4K Ultra HD 8x8 Matrix for HDMI w/ HDCP 2.2

is a trademark of Gefen, LLC.

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation

without prior written notice.

Operating Notes

This product uses UL listed or CE-compliant power supplies.

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands