Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 55

Page: 55 / 204

page | 43

asic Oper

ation

asic Oper

ation

Menu System

►

Enabling / Disabling TCP (Telnet) Access

a. From the

TCP access

screen, press the

Enter

button on the front panel or the

button on the IR remote control.

b. Press the

Enter

button on the front panel or the

button on the IR remote

control to change the current setting. An arrow cursor will be displayed next to

the current setting, indicating that it can be changed:

c. Press and release the

▲

▼

buttons on the front panel or on the IR remote

control, to select the desired setting.

►

Enabled

Allows Telnet sessions to the matrix.

►

Disabled

Disables Telnet sessions to the matrix.

d. Press the

Enter

button on the front panel or the

button on the IR remote

control to save the change.

e. Reboot the matrix to affect changes.

tcp access:

enabled

tcp access:

enabled

tcp access:

disabled

tcp access:

disabled

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands