Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 47

Page: 47 / 204

page | 35

edid mode

input 01

asic Oper

ation

asic Oper

ation

Menu System

6. Press the

Enter

button on the front panel or on the IR remote control to display the

input control screen.

Input 01

will be displayed by default.

7. Press and release the

▲

▼

buttons on the front panel or on the IR remote control,

to select the desired input.

8. Press the

Enter

button on the front panel. If using the included IR remote control,

press the

button.

9. The EDID selection screen will be displayed. The current EDID, for the selected

input, will be displayed. An arrow cursor will be displayed next to the current EDID,

indicating that it can be changed.

10. Press and release the

▲

▼

buttons on the front panel or on the IR remote control,

to select the desired EDID. Refer to

Internal EDID Profiles (page 182)

for details on

internal EDID specifications.

The available EDID options, for each input, are:

EDID

Description

Internal-720p 2Ch

720p with 2-channel audio

Internal-720p Multi

720p with multichannel audio

Internal-1080p 2Ch

1080p with 2-channel audio

Internal-1080p Multi

1080p with multichannel audio

Internal-4K 2Ch

4K Ultra HD with 2-channel audio

Internal-4K Multi

4K Ultra HD with multichannel audio

External

Uses EDID of downstream sink

Custom

Uses a custom EDID

See

Setting the EDID Mode (page 84)

for more information on using the

Custom setting.

edid mode

input 05

edid: input 05

internal-720p 2ch

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands