Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Page: 32 / 204

page | 20
Using the IR Remote Control
1. Go to the routing screen . If the routing screen is not displayed, then press and
release the Back button on the IR remote control until the routing screen is displayed.
2. Select the desired output by pressing one of the Output buttons (A - H) on the
top-portion of the IR remote control. In this example, we will route Input 5 to Output D.
B
asic Oper
ation
B
asic Oper
ation
3. Select the desired input by pressing one
of the
Input
buttons (1 - 8) on the
lower-portion of the IR remote control.
4. The routing process is complete.
out D :output D
A/V In:input 02
out D :output D
A/V In:input 05
®
OK
*Preferred
Output
RMT-88
Menu
Back
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D
E F
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
Output buttons
Input buttons
B
asic Oper
ation
B
asic Oper
ation
Information
The front panel display will only show activity if a routing operation is being
performed on the output that is displayed. Otherwise, the routing operation is
performed in the background. To verify that the new routing state has been
executed, you can view the current routing state for that output. See Viewing
the Routing Status (page 17) for more information.
Routing Inputs to Output