Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Page: 28 / 204

Use the Power button to power-on and power-off the matrix. The Power button is located
on the front panel of the matrix and on the IR remote control.
The first piece of information that is displayed is the model and current firmware.
As of this writing, the current firmware is 0.2B . Be sure to check the Gefen website
for the latest version of firmware.
4. After a few moments, the routing screen will be displayed. The routing screen
represents the “home” screen from which the built-in menu system can be accessed.
1. Connect the included power supply from the
power connector to an available electrical AC
outlet. The Power button will glow solid red,
indicating that the matrix is connected to an active
outlet. However, the matrix is not turned on.
2. Press the
Power
button on the front panel or on
the IR remote control.
3. The Power button on the front panel will glow solid
blue to indicate that the matrix is powered.
page | 16
B
asic Oper
ation
B
asic Oper
ation
Powering the Matrix
ext-uhd-88
v0.2B
out a :output a
A/V In:input 01
EXT-UHD-88
IP Control Out A Out B Out C Out D Out E Out F Out G Out H
In 1 In 2 In 3 In 4 In 5 In 6 In 7 In 8
IR In/Ext
RS-232
24V DC
®
4K Ultra HD 8x8 Matrix for HDMI w/ HDCP 2.2
Back
Enter
IR Power
Menu Preset
Lock
EXT-UHD-88
IP Control Out A Out B Out C Out D Out E Out F Out G Out H
In 1 In 2 In 3 In 4 In 5 In 6 In 7 In 8
IR In/Ext
RS-232
24V DC
®
4K Ultra HD 8x8 Matrix for HDMI w/ HDCP 2.2
Back
Enter
IR Power
Menu Preset
Lock
®
OK
*Preferred
Output
RMT-88
Menu
Back
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D
E F
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
EXT-UHD-88
IP Control Out A Out B Out C Out D Out E Out F Out G Out H
In 1 In 2 In 3 In 4 In 5 In 6 In 7 In 8
IR In/Ext
RS-232
24V DC
®
4K Ultra HD 8x8 Matrix for HDMI w/ HDCP 2.2
Back
Enter
IR Power
Menu Preset
Lock
B
asic Oper
ation
B
asic Oper
ation