Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 45

Page: 45 / 204

page | 33

input 03

1.4 and below

asic Oper

ation

asic Oper

ation

Menu System

11. Press and release the

▲

▼

buttons on the front panel or on the IR remote control,

to select the desired setting.

12. Press the

Enter

button on the front panel or the

button on the IR remote control

to save the setting.

13. To set the HDCP control on a different input or output, press the

Back

button on the

front panel or on the IR remote control.

14. To return to the

HPD Control

option, press the

Back

button on the front panel or on

the IR remote control.

15. To return to the routing screen, press the

Back

button two more times.

input 03

1.4 and below

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands