Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 62

Page: 62 / 204

page | 50

asic Oper

ation

asic Oper

ation

Menu System

►

Enabling / Disabling Remote UDP Access

a. From the

UDP Access

screen, press and release the

▲

▼

buttons on the

front panel or on the IR remote control, to select the

Remote UDP

Access

option. The current setting will be displayed.

b. Press the

Enter

button on the front panel or the

button on the IR remote

control to change the current setting. The cursor will appear next to the current

setting.

c. Press and release the

▲

▼

buttons on the front panel or on the IR remote

control, to select the desired setting.

►

Enabled

Allows the Remote UDP protocol to be used with the matrix.

►

Disabled

Prevents the Remote UDP protocol from being used with the matrix.

d. Press the

Enter

button on the front panel or the

button on the IR remote

control to save the change.

e. Reboot the matrix to affect changes.

remote UDP access:

disabled

remote udp access:

disabled

remote udp access:

enabled

remote udp access:

enabled

asic Oper

ation

asic Oper

ation

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands