IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 13/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
MAIN MENU
The
CE408
is provided with a main menu from which you can manage all
of its functions.
The name of each line indicates the thematic area on which we can take
action, by accessing the corresponding submenus.---------------------------
Pressing the key
and
to scroll through the menus.
Press
ENTER
to enter the corresponding submenus.
Some submenus have an access level to enable it; you must enter the specific password.
If you try to enter a submenu without entering the password, the access
is denied. A higher access level also enables the lower one.---------------
The required access level is indicated, when necessary, to the left of the individual items of the
manual. To enable them, with the password, see the
menu Access.
List and short description of the accessible menus:
RESET
:
Carries out a reset the control unit and return to the main menu.
SENSORS
:
Enter a submenu where you can enable, disable, configure, modify, copy, delete,
and view the details of the sensors.
INPUTS
:
Enter a submenu where you can enable, disable, configure, modify, copy, delete,
and view the details of the logic input.
ZONE
:
Enter a submenu where you can enable, disable, configure, modify, copy, delete,
and view the details of the zones.
EVENTS
:
Enter a submenu where you can view, all events or ones related only to faults /
alarms.
SETTINGS
:
Enter a submenu where you can change, the language, general settings, the
buzzer settings and the date and time.
ACCESS MENU
:
Enter a submenu where you can enable, disable, modify, the password, of the
relative access levels.
SERVICE
:
Enter a submenu where you can perform electrical testing of the control unit
manage the battery and display the status of the sensors.
SD CARD
:
Enter a submenu where you can update the Firmware of the control panel via an
SD Card
RESET
The
RESET
item in the main menu, performs the same function as the
RESET
key, reset the latched
outputs to normal operation, but only if the Sensor or Zone or Input has returned from the alarm
condition.
If there are active alarms, outputs configured as Silenceable (e.g. an
alarm) return to normal operating conditions only for the
time of
silencing.
SENSORS
7 DETAILS
LEVEL NOT
ENABLED
ACCESS
DENIED
Press Esc
STOP
CE408
1 RESET
2 SENSORS
3 INPUTS
4 ZONES
5 EVENTS
6 SETTINGS
7 ACCESS MENU’
