IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 28/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
Press
ENTER
to confirm, or press
ESC
to go back. Each time you press it,
you will return to the previous step.
After confirmation, the window will notify that the operation has been
successful.-------------------------------------------------------------------------------
Then the screen returns the beginning of the management the deletion.
MODIFY (Level 2)
: This item allows modifying a Zone already configured. Press
ENTER
on the item.
The parameters are modified and saved in a similar way to the configuration of the Zone.
DETAILS
: This item allows you to see parameters of a Zone already configured, pressing
ENTER
on its
item.
The voices are the same as the configuration of the Zones, are shown the zones and the number of
the corresponding output. In case you want to go back, press
ESC
.
You can scroll through them using
and
. Then at the end of the screen, is also referred to its
status, and the enabling status of the Zone.
Finally, selecting the row containing the output number, if it is different
from zero, you can press
ENTER
, to view its details. -----------------------------
The items of the details can be scrolled with
and
. In addition, at
the end of the screen, displays the status of silencing output.
EVENTS
In this submenu is possible to view the last
100
stored events. ------------
ALARMS/FAULTS
: are only events related to
faults
and
alarms
of the
sensors, of the inputs, outputs and related zones. They are sorted from
newest to oldest.
The control unit stores the events in a cyclic manner, i.e., after
100, the oldest event is deleted.
To view the Events, press
ENTER
on its item. The screen shows the date, time and type of event. The
events are displayed in groups of on the same day starting with the most recent.
Events and Days can be scrolled using
and
key.
•
First line
: is the event date, in the format dd / mm / yy (Day / Month / Year).
Each subsequent line is an event
•
First part
: it is the time of the event, in the format hh / mm / ss (Hours / Minutes / Seconds).
•
Second part
: the event type is as follows:
o
First letter:
indicates the object to which the event refers:
‘S’:
Sensor.
‘I’:
Logic Input.
‘Z’:
Zone.
‘O’:
Output (relay).
o
Two numbers:
Is the number of the object to which the event refers.
o
Status
: This is the new state reached by the object that caused the event. Specifically:
The Logic Inputs can have 2 states:
ACT
. (
Active
) or
DEA
. (
Deactive
)
.
Outputs (relay) can have 3 states:
ACT
. (Active),
DEA
. (
Deactive
),
SIL
. (
Silenced
).
Sensors and Zones can have 6 states:
FLT
(
Fault
),
NORM
(
Normal
),
AL1
(
Alarm 1
),
AL2
(
Alarm 2
),
AL3
(
Alarm3
),
OVS
(
Over scale
).
DELETE
ZONE
N. 1
DELETED
ZONE DETAILS
ZONE
N. 1
LOGIC:
AND
OUTPU_1_THRESH_1
OUTPUT N. :
2
OUTPU_2_THRESH_1
EVENTS
1 ALLARMS/FAULTS
2 ALL ONES
