IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 15/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
SENSORS
In this submenu you can manage the sensors connected to the unit.
Below, the individual items are described in detail, with the same level
password, which is indicated in parentheses.-----------------------------------
ENABLE/DISABLE (Level 1)
: These two items allow you to enable or
disable one or more sensors, even simultaneously.
The
disabled
sensors, no longer trigger the alarm and fault outputs, associated with them
(the outputs remain in a state of normal operation, and then the alarms associated with them
are not triggered).
Disabled
status is displayed on the main screen, next to the sensor, with
asterisks “
*****
”.
To
enable
or
disable
a sensor press the
ENTER
key on the relevant item,
highlighted. With
and
it is possible to select, if you take action
on a single sensor or on a group of sensors. -----------------------------------
The first line, is acting on a single sensor. Pressing
ENTER
on the first line, will highlight the number of
the sensor. Then with
and
you choose the desired number and
pressing
ENTER
the confirmation window will appear.
The second line, acts on a group of sensors. -----------------------------------
Pressing
ENTER
on the second line, will highlight the first sensor’s number
of the group.
You can
enable
or
disable
all sensors, including between two,
both from the smallest to the largest number, and the reverse.
If the two numbers of sensors were equal, the effect is identical to the
management of a single sensor.
With
and
you can choose the number of required sensor,
pressing
and
you change from one value to another and then
pressing again
ENTER
confirmation window will appear.------------------------
Press
ENTER
to confirm. In case, you want to go back, press
ESC
. Each
time you press this key, you will return to the previous step.
If the sensor or one of the group’s sensors is not configured, a window
notifies you that the operation is not possible. ----------------------------------
ENABLE
SENSOR N.
FROM N. TO N.
ENABLE
SENSOR N.
FROM N. TO N.
ENABLE
CONFIRM ?
YES = ENTER
NO = ESC
ENABLE
SENSOR
N. 1
NOT CONF.
STOP
SENSOR
1 ENABLE
2 DISABLE
3 CONFIGURE
4 COPY
5 DELETE
6 MODIFY
7 DETAILS
