IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 23/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
Press
ENTER
to confirm. To go back, press
ESC
. Each time you press it,
you will return to the previous step.
After confirmation, the window will notify that the operation has been
successful.-------------------------------------------------------------------------------
Then the screen returns the beginning of the management the deletion.
MODIFY (Level 2)
: This item allows modifying a sensor already configured.
To modify a sensor press
ENTER
on its entry.
The parameters are modified and saved similarly to the configuration Preconfigured, but in this case, it
is not possible to change the following items:
MODEL
,
TYPE
,
GAS
,
UoM
,
RANGE
,
AL
.
DETAILS
: This item allows you to see parameters of a sensor configured.
To see the details of a sensor, press
ENTER
on its entry. In case you want to go back, press
ESC
.
Choosing the sensor, the voices are the same as the configuration of a
sensor Preconfigured. You can scroll through them using
and
.
Then at the end of the screen, is also referred to the enable status of the
sensor.
Finally, selecting the row containing the number, if it is different from
zero, you can press
ENTER
to view its details.-------------------------------------
The items of the details can be scrolled with
and
keys. In
addition, at the end of the screen, displays the status of silencing output.
LOGIC INPUT
In this submenu is possible to manage the logic input connected to the
unit.----------------------------------------------------------------------------------------
It is recalled that the central CE408P, has only one logic input.
ENABLE/DISABLE (Level 1)
: These two items allow you to
enable
or
disable
the only one
Logic input
. The status
Disabled
is displayed on
the main screen, next to Input, the symbol "
*****
".
The input
disabled
, do not activate the relay output associated with it. The output remains in
a state of normal operation and therefore the devices attached to them are not triggered.
To
enable
or
disable
the Logic Input, press
ENTER
on the highlighted item.
Press
ENTER
to confirm. ----------------------------------------------------------------
Then the confirmation window will appear ---------------------------------------
Press
ENTER
to confirm or to go back, press
ESC
.
If the Logic Input were not been configured, a window notifies you that
the operation is not possible e then the screen returns to the selection of
Input. --------------------------------------------------------------------------------------
THRESHOLD__1:
7
OUTPUT_1 N. :
0
THRESHOLD __2:
10
OUTPUT_2 N. :
2
THRESHOLD __3:
20
OUTPUT _3 N. :
3
INPUTS
1 ENABLE
2 DISABLE
3 CONFIGURE
4 DELETE
5 MODIFY
6 DETAILS
ENABLE
INPUT N.
1
ENABLE
CONFIRM ?
YES = ENTER
NO = ESC
ENABLE
INPUT
N. 1
NOT CONF.
DELETE
SENSOR
N. 1
DELETED
