Fig.26
6.
Remove the double-disk (16) from the assembly device (M) or vice (W),
securing the double-disk (16) by hand.
7.
Carefully place the double-disk (16) onto the valve disc (15).
8.
Clamp the valve disc (15) on the spanner flats (15.1) in the vice with
protective jaws.
Fig.27
9.
Loosen the threaded pin (23) from the ring (10) with the hex socket screw and
create a bit of distance from the valve disc (15) by unscrewing.
10.
With an open-ended wrench, loosen the ring (10) on the spanner flats (10.1)
in an anti-clockwise direction and unscrew completely.
11.
Remove the stem diaphragm (2) from the valve disc (15).
Maintenance
Disassembling the valve
430BAL013307EN_8
04.08.2022
53
Summary of Contents for D-tec D
