manualshive.com logo in svg

GE LOGIQ 100 PRO, Technical Publication, Page: 99 / 196

Share
Download
GE LOGIQ 100 PRO Technical Publication Download Page 99

GE H

EALTHCARE

 

 

D

IRECTION

 5305880-100, R

EVISION

 3 

LOGIQ™ 100 PRO S

ERVICE

 M

ANUAL

 - 

Page  5-13

5-5-2

Davinci Board

The Davinci CPU board uses TMS320DM6446 chip that contains an ARM Processor, DSP and 
Video processors into a single chip.

 

 
The Major functionalities & corresponding implementation is described below.

 

 

1) System Memory - 256MB DDR2 Memory.

 

 

2) Program Storage – 16 Megabytes of NOR Flash is used to store the Boot loader code, Kernel, 
and Application software. 
 
3) Image Storage – 64 Megabytes of NAND Flash is used to store the User Images. It is also 
used to store a part of Application software and operating system code.

 

 

4) Keyboard interface (Ultrasound keyboard I/f, PS 2 trackball interface, Gain Controller 
interface). Ultrasound Keyboard is interfaced to Davinci CPU PWA.The serial communication 
occurs at 9600-baud rate.

 

 
Optical Trackball TB_CLK and TB_DATA pins are connected to Davinci CPU PWA.  Trackball 
supports Ps2 standard. 
 
GAIN Encoder - GAIN_CCW and GAIN_CW pins of the gain encoder are connected to the GPIO 
pins of Davinci CPU.

 

 

5) On Screen Display (OSD), Video Out and Monitor Display - The DAVINCI CPU generates the 
OSD along with the image in NTSC or PAL video output format (standard) to the Video Out and 
Monitor connector. 

 

6) USB port interface - The Davinci CPU PWA provides one USB 2.0 Host connector. This port is 
used to interface Thermal Printer, DeskJet printer as well as to transfer the image to Memory 
stick in JPEG format.

 

 
7) NTSC and PAL setting - A Dipswitch is provided to select NTSC or PAL standard. This switch 
is available on Davinci CPU PWA.  
 
8) Real Time Clock (RTC) - RTC chip is provided on Davinci CPU PWA that acts as a timekeeper 
i.e. it maintains the system clock and date.

 

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process. 

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 100 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Reviews:

No comments