GE LOGIQ 100 PRO Technical Publication Download Page 117

Page: 117 / 196

GE H

EALTHCARE

IRECTION

5305880-100, R

EVISION

LOGIQ™ 100 PRO S

ERVICE

ANUAL

Chapter 7 - Diagnostics/Troubleshooting

Page 7-13

Monitor Test (Contd.,)

Note:

The patterns in 7-7 to 7-10 are written on the overlay where as the pattern in 7-11 to 7-13 is written
on the image memory.

7-7 to 7-9

are also available in reverse video

7-2-5

Key Operation History

When this option is selected from the Main Menu the following appears indicating a maximum of 32
keys last activated. The history of keys used is stored even after powered off.

Figure 7-13 Monitor Test

Figure 7-14 Key Operation History

KEY OPERATION HISTORY

KEY OPERATED

2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.

17.

18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30
31.
32.

PRESS EXT_VIDEO TO QUIT

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 118 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Search results

Summary of Contents for LOGIQ 100 PRO

Reviews:

GE LOGIQ 100 PRO, Technical Publication, Page: 117 / 196

Search results

Summary of Contents for LOGIQ 100 PRO

Reviews: