GE H
EALTHCARE
D
IRECTION
5305880-100, R
EVISION
3
LOGIQ™ 100 PRO S
ERVICE
M
ANUAL
Page i-iv
-
DAMAGE IN TRANSPORTATION
All packages should be closely examined at time of delivery. If damage is apparent write “Damage
In Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed
for” by a GE representative or hospital receiving agent. Whether noted or concealed, damage
MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after
receipt, and the contents and containers held for inspection by the carrier. A transportation
company will not pay a claim for damage if an inspection is not requested within this 14 day period.
CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY
All electrical installations that are preliminary to positioning of the equipment at the site prepared for
the equipment shall be performed by licensed electrical contractors. Other connections between
peices of electrical equipment, calibrations and testing shall be performed by qualified GE Medical
Systems personnel. In performing all electrical work on these products, GE will use its own specially
trained filed engineers. All of GE’s electrical work on these products will comply with the
requirements of the applicable electrical codes.
The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineer’s,
personnel of third party service companies with equivalent training, or licensed electricians ) to
perform electrical servicing on the equipment.
OMISSIONS & ERRORS
If there are any omissions, errors or suggestions for improving this documentation, please contact
the GE Medical Systems Global Documentation Group with specific information listing the system
type, manual title, part number, revision number, page number and suggestion details. Mail the
information to : Service Documentation, 9900 Innovation Drive (RP-2123), Wauwatosa, WI 53226.
, USA.
GE Medical Systems employees should use the iTrack System to report all documentation errors
or omisions.
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5305880-100TPH_r3.pdf Page 7 of 197