manualshive.com logo in svg

GE LOGIQ 100 PRO, Technical Publication, Page: 113 / 196

Share
Download
GE LOGIQ 100 PRO Technical Publication Download Page 113

GE H

EALTHCARE

 

 

D

IRECTION

 5305880-100, R

EVISION

 3

LOGIQ™ 100 PRO S

ERVICE

 M

ANUAL

Chapter 7 - Diagnostics/Troubleshooting

Page 7-9

7-2-3

Keyboard Tests

When this Option is selected following Menu appears

All Tests

This option is used to run all tests in the menu.

Keyboard Alive Test

In this test, keyboard alive condition is tested by interacting with the keyboard firmware directly.This 
test is done to check the communication with the Davinci.

Keys Test

In this test, all the keys in the keyboard can be tested. The user is prompted to press the keys on 
the keyboard and the pressed keys are highlighted on the screen. (This is a toggle operation). 

Note: 

 During Keys Test Press “Ext. Video” at the last. Pressing “Ext. Video” key 
interrupts the test and return to main keyboard Tests Menu.

LEDS Test

During this test 

FREEZE

 field and 

EXTERNAL VIDEO

 field will be displayed on the monitor. The 

FREEZE 

and 

    EXTERNAL VIDEO 

LEDs blink for a while sequentially and the corresponding field 

gets highlighted.

Trackball Test

A cursor is displayed on the monitor and the user can move the trackball and move the cursor over 
the screen.

Gain Knob Test

In this test, the user can check for the operation of the gain knob. The current gain value is displayed 
on the screen.

Main Menu

This option is used to return to the main menu.

Quit

This option is used to come out of the diagnostic and enter the application mode.

Figure 7-6 Keyboard Tests

KEYBOARD TESTS

1.)

ALL TESTS

2.)

KEYBOARD ALIVE TEST

3.)

KEYS TEST

4.)

LEDS TEST

5.)

TRACKBALL TEST

6.)

GAINKNOB TEST

P.)

MAIN MENU

Q.)

QUIT

ENTER THE CHOICE:_

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process. 

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 114 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Reviews:

No comments