manualshive.com logo in svg

GE LOGIQ 100 PRO, Technical Publication, Page: 70 / 196

Share
Download
GE LOGIQ 100 PRO Technical Publication Download Page 70

GE H

EALTHCARE

 

D

IRECTION

 5305880-100, R

EVISION

 3 

LOGIQ™ 100 PRO S

ERVICE

 M

ANUAL

Page 3-26

Section 3-6 - System Configuration

3.6.4.6

USB MEMORY STICK

This module serves as an interface which enables users to transfer images from LOGIQ™ 100 PRO 
to USB memory stick. LOGIQ™ 100 PRO in JPEG format.This can be further uploaded to any PC 
having windows operating system and USB port support.

Figure 3-24 USB Memory Stick connection to Rear Panel

Installation of USB Memory Stick:

1.)

Connect the USB Memory stick to the USB port provided in the rear panel of LOGIQ™ 100 
PRO unit.

2.)

Press the recall key. From the main menu Press 4 to enter the multiple selection menu.

3.)

To transfer the images to a Memory stick move the trackball to the images that you want to 
transfer and press 3.To transfer all images available in the archive press 2 to select images 
and 3 to transfer images to Memory stick.

Please ensure that the USB 

Memory stick

 has to be connected before attempting 

to transfer images to USB 

Memory stick

. If USB is not connected to the LOGIQ™ 

100 PRO system, the system will prompt " USB not connected"

. 

Do not remove the USB 

Memory stick

 when the image is getting transfered.

Note : USB hard disk drive may/may not be recognized by the system.

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process. 

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 71 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Reviews:

No comments