manualshive.com logo in svg

GE LOGIQ 100 PRO, Technical Publication, Page: 77 / 196

Share
Download
GE LOGIQ 100 PRO Technical Publication Download Page 77

GE H

EALTHCARE

 

 

D

IRECTION

 5305880-100, R

EVISION

 3

LOGIQ™ 100 PRO S

ERVICE

 M

ANUAL

Chapter 4 - Functional Checks

Page 4-3

4-2-1-4

Front Panel ON/OFF

Press the Front Panel 

ON/OFF 

key once. to Switch ON/OFF

When power is applied to the Scanner, Power is distributed to the Fan, Control panel, Monitor, 
Internal and External I/O’s, Boards & Peripherals. Back End Processor starts and its software code 
is distributed to initiate the scanner.

Power Up Display Comes Up. Refer figure 4-3.

4-2-1-5

Power Shutdown

1.)

Switch OFF the 

ON/OFF 

 at the Front of the system.

2.)

Disconnect the Mains Power Cable if needed. 

Figure 4-2 ON/OFF key on Front Panel 

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process. 

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 78 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Reviews:

No comments