manualshive.com logo in svg

GE LOGIQ 100 PRO, Technical Publication, Page: 81 / 196

Share
Download
GE LOGIQ 100 PRO Technical Publication Download Page 81

GE H

EALTHCARE

 

 

D

IRECTION

 5305880-100, R

EVISION

 3

LOGIQ™ 100 PRO S

ERVICE

 M

ANUAL

Chapter 4 - Functional Checks

Page 4-7

Refer User Manual for the Remaining Operations

CINE 

(Press Freeze and Rotate B/M Gain/
Cine Scroll )

Cine Menu:

Press 1

 

(Start Frame)

 

Press 2

 

(End Frame)

Press 3

 

(Cine Loop)

Press 4

 

(Cine Gauge)

The Cine Gauge, menu and the Cine frame number 
appears at the bottom of the display.

Rotate the 

Cine Scroll

 dial to move through the images 

in Cine Memory. 

Cine frame number is displayed on the left side of the 
screen.

Move the Cursor by rotating the 

Cine Scroll

 dial to the 

frame you want and press 1 again to select the Start 
frame.

Move the Cursor by rotating the Cine Scroll dial to the 
frame you want and press 2 again to select the End 
frame.

Enters into Cine loop within the selected Start & End 
frames.

To toggle between the Cine Gauge display

Flash Memory (Image storage)

Freeze the image

Press 

Store

Press 

Recall

Comment column appears at the bottom of the display. 
Enter the comment in that and press 

Store

 again to 

Store the image.

Image Archive

 screen appears with option menu at the 

bottom. 

Select the image using the trackball (Use Dynamic 
Range to page up/down in the Image Archive screen).

Press 

1

 to View the selected image.

Press 

2

 to Clear the selected image.

Press 

3

 to Clear All the stored images.

Press 

4

 to Sort the images by name or date.

To Exit Image Archive, press 

Clear

.

Unfreeze

 to exit from the freezed image.

TGC

The 

TGC

 is used to adjust the Gain at a specific depth. 

Slide the control to the right or left to increase or 
decrease gain. 

TASK

Expected Result

Table 4-2 Basic Controls

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process. 

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 82 of 197

Summary of Contents for LOGIQ 100 PRO





































































































































































































Reviews:

No comments