GE Druck DPI 615 IS, User Manual

Page: 13 / 95

K0430 Issue No. 2 4
HARD KEY FUNCTIONS (Fig. 1)
* These key functions are not available in BASIC mode
Key Function
Page
reference
I/O
This key selects the instrument ON and OFF. 7
SETUP*
The SETUP key provides access to the instrument’s general
configuration parameters that are set-up to certain default
parameters on delivery.
36
ZERO
The ZERO key zeroes either the selected input or output display, only if
the display reading is within 5% of zero. Attempts to zero a larger
offset result in an error message,
Zero too large.
9
INPUT*
The INPUT key selects the input parameter to be displayed. 18, 19
TASK
The TASK key rapidly configures the instrument for a number of
different types of external device calibration. There are twenty task
configurations available, eleven pre-programmed configurations and
nine user defined configurations
10
OUTPUT*
The OUTPUT key selects the output parameter to be displayed. 24-27
STORE*
Depending upon how the instrument’s STORE mode is set-up, this key
is used either to store up to 20 display screens (in SNAPSHOT mode),
or to manually log a screen in DATALOG mode.
29, 36
RECALL*
This key recalls a previously stored screen to the display. Depending
on the
STORE mode set-up, operation of this key recalls either the
snapshot of a previously stored screen or data log file. In STORE
mode, selection displays the last screen stored. By using the cursor
keys, the operator can scroll either forward or back through memory
locations.
28, 31, 35
ENTER
The ENTER key either enters data (accept entered data), or, in
conjunction with the soft keys, accepts a given selection.
2
EXIT
The EXIT key operates in conjunction with all the other hard and soft
keys to exit from the current screen or menu level, to the level
immediately preceding it. To quit completely from any menu level,
press
EXIT until the MEASURE/SOURCE screen is displayed.
2
INTRODUCTION Summary of Functions