manualshive.com logo in svg

GE HEALTHCARE CARESCAPE Monitor B650, Technical Manual

The GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual is a comprehensive guide for users of this advanced medical monitor. Packed with detailed instructions and troubleshooting tips, this manual can be easily downloaded for free from manualshive.com, ensuring that you have the necessary resources to utilize this innovative product effectively.

Share
Download
background image

CARESCAPE Monitor B650

 120

2062973-002

Support for interfaces:
•

A USB host controller (root hub) provides a high speed USB interface for the external USB 
ports in the interface boards and for the internal system components (user interface 
board, tone generator and for the USB Disk On Module).

•

The main processor provides one link layer interface for the external RJ-45 Ethernet ports 
and ePort DB9 PDM interface in the interface board.

•

The CPU board provides a physical layer Ethernet interface for the 10-pin ePort connector 
in the PDM docking station.

9.1.3 Display subsystem

Display

The patient monitor has an integrated 15" active matrix color TFT LCD panel with an LED 
backlight unit. It provides wide viewing angle and supports XGA (1024 * 768 pixels) resolution. 
The video controller is integrated into the CPU board. The CPU board provides LVDS output and
+3.3 V supply voltage to the LCD panel via the display cable.
The currently manufactured patient monitors have an LCD panel with a LED backlight unit and
a Backlight LED Adapter Board. The earlier production series have an LCD display with 2 CCFL
(Cold Cathode Fluorescent Lamp) backlight units and a Backlight Inverter Board.
To identify the display type of the patient monitor, detach the top cover and check the color of
the backlight cable and the rear of the LCD panel:

LCD display with a LED backlight unit and a Backlight LED adapter 

board.

This display model has a backlight LED adapter board that connects to the DC/DC board with 
an inverter cable and to the LCD display with a single black backlight cable.
The backlight LED adapter board takes care of the following functions:

−

It passes the +12V supply voltage from the DC/DC board to the LED backlight unit in the 
LCD display.

Patient monitors with LCSD display and CCFL 
backlights have:
- A dual-wire pink and white backlight 

cable.

- The color of the rear side of the LCD panel 

is metallic grey.

- The LCD panel type is G150X1-LO1.

Patient monitors with LCD display and LED 
backlight unit have:
- A white plastic shield that covers the 

backlight.

- The backlight cable (black) is not visible as 

it is connected to the lower part of the 
backlight LED adapter board.

- The LCD panel type is G150XGE-LO4.

Summary of Contents for CARESCAPE Monitor B650

















































































































































































































































Reviews:

No comments

Related manuals for CARESCAPE Monitor B650

ZOLL X Series Operator'S Manual preview
X Series
Brand: ZOLL Pages: 344
ABB C571-AC Instructions Manual preview
C571-AC
Brand: ABB Pages: 9
Odom ES3 Hardware Configuration preview
ES3
Brand: Odom Pages: 19
MacDon M205 Installation Instructions Manual preview
M205
Brand: MacDon Pages: 30
BACtrack VIO User Manual preview
VIO
Brand: BACtrack Pages: 13
Badgematic FLEXI Manual preview
FLEXI
Brand: Badgematic Pages: 28
BACtrack Select S80 Product Specifications preview
Select S80
Brand: BACtrack Pages: 2
MADRIX STELLA Quick Start Manual & Technical Manual preview
STELLA
Brand: MADRIX Pages: 28
BACTcontrol microLAN Software Manual preview
microLAN
Brand: BACTcontrol Pages: 28
GE PANDA Service Manual preview
PANDA
Brand: GE Pages: 212
Harken T2 Loop 2148 Instructions preview
T2 Loop 2148
Brand: Harken Pages: 4
Harken 418 Instructions preview
418
Brand: Harken Pages: 2
Hardi TERRA FORCE BOOM Operator'S Manual preview
TERRA FORCE BOOM
Brand: Hardi Pages: 40
Harken 598 Instructions preview
598
Brand: Harken Pages: 4
Hardy Diagnostics QuickSlide HemaPRO Quick Start Manual preview
QuickSlide HemaPRO
Brand: Hardy Diagnostics Pages: 2
Hardt Elemendt 1000 Assembly Replacement preview
Elemendt 1000
Brand: Hardt Pages: 2
Pari mini Instructions For Use Manual preview
mini
Brand: Pari Pages: 50
Icare HOME Instruction Manual preview
HOME
Brand: Icare Pages: 42

Brands by name

Popular brands

Load more brands