GE HEALTHCARE CARESCAPE Monitor B650, Technical Manual

Page: 102 / 240

CARESCAPE Monitor B650
94
2062973-002
7.17 License management
You can upload a license file that contains all acquired licenses and activation codes.
Alternatively, you can enable and activate individual software packages and host software
feature licenses by entering the required activation code manually.
NOTE: Contact GE Healthcare to acquire activation codes for licenses.
7.17.1 Enabling and activating host software package
NOTE: As a factory default, the ICU software package is always activated.
NOTE: You can have several software packages enabled, but only one of them can be selected
active at a time.
Enter an activation code to enable the software package.
1.
Log in to Webmin.
2. Select Configuration > Licenses .
3. In the Sub-Modules for Licenses window, select Software Package .
4. Below Software Package in the Software Package window:
a. From the Status drop-down list, select ENABLED .
b. Enter a valid Activation Code for the new software version.
5. Select Save .
6. To activate a software package, select the desired radio button in the Active column.
7. Select Save .
All license changes take effect after the next patient monitor restart.
NOTE: The software license for the active host software version is shown in the
Software
Package window below the Active Software License . This license is typically entered before
activating a new host software version, see Software Management.
WARNING If the software package is changed, all clinical settings will reset to factory
defaults.
7.17.2 Enabling and activating host software feature licenses
Feature licenses are available either as permanent or as trial licenses. Activation codes for trial
licenses are valid for 90-days.
Enter the activation code to enable a software feature.
1.
Log in to Webmin.
2. Select Configuration > Licenses .
3. In the Sub-Modules for Licenses menu, select Host Licensing .
4. In the Host License window, enter the activation code by the appropriate OPTIONAL host
license feature.
NOTE: To activate an OPTIONAL-TRIAL license, enter the expiration date in addition to the
activation code.
5.
From the Status drop-down list, select ENABLED .
6. Select Save .
All license changes take effect after the next patient monitor restart.