GCC Technologies LaserPro X252RX, User Manual

Page: 97 / 115

86
232001240G(08)
7.2 Air Compressor Option ( 220V Only )
Specifically designed for laser engravers, the air compressor utilizes an oil-free diaphragm. The air
compressor helps eliminate harmful and potentially damaging moisture from the laser optics, maximizing
laser optic life. In addition the air compressor provides the optimal air flow to the SmartAIR nozzles to
minimize flaming, suppress working temperatures, and blow away dust and particle byproducts generated
from the laser process.
INSTALLATION:
1) Remove the plugs on the air compressor to expose the air inlets.
2) Fasten the included air tube fastener valve to the outgoing air inlet (indicated by 2a) and the air filter
into the ingoing air inlet (indicated by 2b).
3) Connect a ¼” tubing to the air tube fastener valve on the air compressor.
NOTE
It is important that the ¼” air tubing has clean, straight cuts on each end. Jagged or
slanted cuts will not produce adequate sealing capabilities.
4) Locate the air tube valve positioned towards the front side of X252RX & X380RX. As indicated below:
2a
2b
¼” Air Inlet
Tubing
Power Cord A
Power Cord B
Plugs Plugs