GCC Technologies LaserPro X252RX, User Manual

Page: 99 / 115

88
232001240G(08)
<X380 Air Compressor Connection Power Outlet>
7) Congratulations, you have finished setting up the air compressor. Make sure you have the proper
SmartAIR nozzle installed (depending on your application), before you turn on and utilize the air
compressor.
OPERATION:
1) Switch on the air compressor unit and make sure that the airflow regulator on the air assist valve is
opened (turn clockwise to increase the airflow, counter-clockwise to decrease the airflow). The air
nozzle under the laser head should emit a steady flow of air.
With the SmartAIR nozzle and air compressor properly installed and operating, all configurations and
settings relating to air-assist functions are controlled through the LaserPro X252RX & X380RX print driver
and hardware control panel. Please refer to the LaserPro X252RX & X380RX PEN page on print driver
section of this manual for details on how to enable and configure air-assist functionalities.
7.3 SmartBOX Option
The SmartBOX is an innovative combination of a cutting box, honeycomb table, and material support stands.
During the cutting and engraving process, unwanted scrap, dust, and vapor byproducts are left behind. The
cutting box collects the larger scrap byproducts while venting out the smaller dust particles, vapors, and
smoke to minimize excess buildup on the machine, worktable, and your project. The SmartBOX allows you
to maintain a clean worktable and minimizes backside burning of your media, whether you are working with
thick and firm materials or thin and flexible materials.
SmartBOX Components
Cutting Box
Honeycomb Table/
Aluminum Grid Cutting Table
Plug the external 220V air
compressor to this power
outlet to control the air
assist function by laser
machine driver and firmware