24
HiToP
®
184
gbo Medizintechnik AG
Version 2.0
3.1.2 Detail view
It is possible to get a detail view of each active channel. The selection of this view is done by the
Softkeys
[Detail view] allocated to the channels.
In contrary to the general view, the detail view shows further parameters of the type of current and the initial
values graphically and numerically.
Menü
FIX
30:22
14,5 V
4096 Hz
122 mA
118 V/A
1769 mW
125,6 mWh
321,4 mWh
4096 Hz
32768 Hz
SimulFAM X
Int:
f=
I
II
III
IV
Change slope
Figure 6:
Detail view
!!
Note!
You will return to the general view by pressing a
Channel key
again.
The display of patient impedance is shown in unit "V/A" with medical and therapeutic precision.
3.2 Operating notes
Each current type can be modified specifically. Certain modifications can be set only when the
Intensity
regulator
is
„0.0“
. Other modifications can be set also during the therapy. Please observe the acoustical and
optical user support.
3.2.1 Menu key
Menu
Menu key:
Use the black
Menu key
to call up the main menu
(see chapter 2.4.1
The main menu)
.
Figure 7:
Black Menu key on the upper right of the display.
Graphic bar : upper to lower cut-off frequency ratio, in %
(see chapter 3.2.6 SimulFAM
X / Change slope).
Sum of energy
released through
all
active channels
.
Output voltage
Output current
Patient impedance
Power
Released energy of
the
selected channel
in the detail view
