HiToP
®
184
gbo Medizintechnik AG
Version 2.0
15
2.2.1 Voltage selection and fuses
1. Unplug the mains plug.
2. The device is protected by 2 fuses on the mains side that are located in a pluggable box at the back of the
device.
3. The adjusted supply can be seen through the small window of the box.
4. With a screw driver the box can be pulled out of the receiver by the small slot.
5. Take the voltage selector out of the receiver and set the correct mains voltage.
Connect the High Tone Power Therapy device with the mains cable to a shockproof socket.
The High Tone Power Therapy device is switched on by the mains switch on the back of the device. By this
arrangement erroneous, unintended disconnection of the device during normal operations shall be avoided.
After switching on the device, an automatic check of all functions will be carried out.
2.3 Placing out of operation
In order to disconnect the device just disconnect it from the mains power supply. No other measures are to be
taken.
