| Equipment Set Up | User Guide |
9
OMNI™ CONTROLLER
Omni controls the simulator’s responses with
the touch of button. Connect the communication
cable to the simulator and to Omni.
A startup screen is shown while Omni is
detecting the simulator features.
After the startup screen, Omni will automatically
proceed to the main screen.
WARNING
Do not connect the simulator or Omni to a
computer, LAN network or unauthorized
diagnostic equipment using the
communication cable (Ethernet cable).
Doing so will cause serious damage to
the equipment.
POWER SUPPLY
Connect the power supply to the power input
located on the simulator’s left side, and then
connect the power supply to the wall outlet.
BLOOD PRESSURE ARM SETUP
1. Wrap the blood pressure cuff around the
arm, midway between the deltoid and elbow.
Ensure the arrow on the cuff points
toward the elbow following the direction
of blood low in the artery.
2. Connect the blood pressure cuff extension to
the luer connector on the left shoulder of the
simulator.
Summary of Contents for Super Chloe S222.100
Page 2: ...2 User Guide Super Chloe...
