8 |
User Guide | Equipment Set Up |
7. Line up the holes and slide the waist rod
through the white guide tube. Replace the
waist knob and fasten irmly.
To disassemble the simulator for transportation
or cleaning, reverse this procedure.
LEG ASSEMBLY
1. Place the simulator on a lat surface.
2. Remove the wing nuts, washers and springs
from the bolts on the hips.
3. Remove the IM pad from each leg and slide
the bolt through the oriice in the leg.
4. Reach through the IM site and assemble
the fasteners onto the hip bolt in this order:
washer, spring, second washer, and wing
nut.
5. Tighten the wing nut until the spring is
compressed slightly.
Summary of Contents for Super Chloe S222.100
Page 2: ...2 User Guide Super Chloe...
