| Equipment Set Up | User Guide |
7
Equipment Set Up
Overview
The simulator is shipped partially assembled.
Perform the following steps as part of the irst
installation procedure.
SIMULATOR ASSEMBLY
1. Within the lower half of the simulator, a rod
passing through the midsection connects
the upper and lower torso. To assemble
the internal components of the simulator,
unscrew one knob at the end of the rod.
2. Pull from the side of the rod where the
second knob is attached.
3. Remove the rod from within the white guide
tube and place aside.
Ensure the white guide tube remains in place.
4. Locate the stomach reservoir positioned in
the upper torso.
5. Connect the tube from the stomach reservoir
to the white port in the lower torso.
6. Ease the lower torso into the upper torso,
being careful not to disengage the stomach
reservoir.
Summary of Contents for Super Chloe S222.100
Page 2: ...2 User Guide Super Chloe...
