| Omni™ Code Blue® and BP Arm | User Guide |
31
FACTORY SETTING
The DEFAULT option is used to restore sensors
back to factory settings, erasing any calibrations
performed by users. When restoring the sensors
to factory settings, do not practice auscultation.
This action will interfere with the reset.
After pressing the
DEFAULT
button, a message
on the screen will notify the user about the
status of the reset.
HELP
The help window provides access to global
settings such as backlight time and Omni/
Simulator serial number.
BACK
Return to previous screen.
BACKLIGHT
The default value for Omni’s backlight timer is
10 minutes. After 10 minutes the backlight will
turn off.
To increase the backlight duration, adjust the
backlight timer with the plus or minus sign.
Press OK to accept the changes.
SERIAL NUMBER
View Omni and Simulator serial number. Press
OK to return to the HELP menu.
CPRLink
™
CRPLink is an application that enables
monitoring and logging of compressions and
ventilations, performed in real time by the user,
on a PC.
This software aims to provide additional testing
and teaching tools for CPR using an interface to
display a waveform graph of the compressions
and ventilations.
CPRLINK MINIMUM SYSTEM
REQUIREMENTS
• Operating System: Windows XP or Windows 7
• Computer and processor: 1 gigahertz (GHz)
or faster 32-bit (x86) or 64-bit (x64) processor
• Memory: 1 gigabyte (GB) RAM (32-bit) or 2
GB RAM (64-bit)
• Hard disk: 4 gigabyte (GB) available disk
space
• Install media: CD/DVD Drive
• I/O Ports: USB port
SETUP
CPRLINK SOFTWARE INSTALLATION
If installing the CPRLink software for the irst
time, follow the instructions listed below:
1. Insert the CPRLink installation CD in your
PC.
2. Follow the instructions on your screen.
Summary of Contents for Super Chloe S222.100
Page 2: ...2 User Guide Super Chloe...
