108
2. Wash the drip tray, filling level indicator, and cup tray in warm soapy water
using a soft nylon brush or cloth. Wipe dry all parts.
3. Push the filling level indicator back onto its support until it engages with a click.
To ensure correct functioning, check whether the filling level indicator can move
freely up and down. When the filling level indicator sticks to the support, pull it
out again and turn it a little. Then insert the filling level indicator again.
4. Replace the cup tray. Insert the drip tray in the base of the housing.
Important:
Within the base of the appliance, via an overflow opening surplus
water drains away from the group head. With the drip tray inserted correctly, the
water will flow into the drip tray. Thus,
do not operate the appliance without the
drip tray inserted correctly
.
CLEANING THE STORAGE CHAMBER
The cleaning tool and the second filter basket may be stored in the storage chamber
at the top of the housing. Because the storage chamber is covered by a lid, it will
not need much cleaning effort.
5. Remove the lid of the storage chamber and take out the cleaning tool and filter basket.
6. You may clean the lid of the storage chamber, cleaning tool, and filter basket
in warm dishwater. Handle the cleaning tool with care to avoid pricking.
7. Thereafter rinse the parts thoroughly and wipe dry.
8. Wipe the interior of the storage chamber with a soft damp cloth. Then wipe dry.
9. Leave all parts and the storage chamber dry naturally. Then re-insert the acces-
sories and re-place the storage chamber lid.
CLEANING THE HOUSING AND WARMING PLATE
Important:
Do not use abrasive cleaners, pads or cloths, which could scratch the
surfaces.
The outer housing, power cord, and warming tray can be cleaned with a soft, damp
cloth. Polish with a soft, dry cloth.
AFTER CLEANING
Leave all parts of the appliance dry naturally for at least 1/2 hours. Thereafter assem-
ble the appliance completely according to the instructions given for each component.
