67
on or in the appliance or any of its parts (e.g. warming plate or cup
tray), to avoid damage.
• Only use heat-resistant cups, mugs, and glasses with the appliance to
avoid damage and severe injuries due to splinters and hot liquids.
For
texturing milk, do not use glass vessels, because even heat-resi-
stant glass could crack due to the local heating during texturing.
• For operation, only fill cold, clear tap water or low-mineral bottled
water in the water tank up to the MAX filling level marking at the maxi-
mum (max. 1.5 litres). However, do not operate the appliance while
the water tank is empty to avoid overheating.
• Always switch OFF (press the power button), unplug the appliance,
and leave the appliance cool down, before cleaning the appliance,
or when the appliance is not in use. Additionally, remove the drip tray
and empty the water tank, before moving the appliance. Always hold
the machine back post at both sides for moving the appliance.
Do
not hold the appliance at the group head, water tank, drip tray,
or power cord for moving the appliance.
• Keep the appliance and its parts and accessories clean. Clean the
appliance according to the instructions in chapter ‘Care and Clea-
ning’. Do not use any abrasive cleaners, cleaning pads (e.g. metal
scouring pads), or any corrosive cleaners (e.g. disinfectants, chemi-
cal bleach, unsuited descaling solutions) for cleaning. Do not use any
hard or sharp-edged foreign objects for cleaning the appliance.
•
Do not place the espresso machine or any of its parts or accessories
in an automatic dishwasher.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is driven electrically. Place the appliance near a suitable
wall power outlet to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected proper-
ly. Ensure that the voltage rating of your mains power supply corresponds
to the voltage requirements of the appliance (220 - 240 V, 50/60 Hz, AC,
rated for at least 16 A). The power outlet socket must be installed separately
from other power outlet sockets to avoid interference with other appliances.
