109
bled correctly. Switch off the appliance again and grasp the blade assembly
with both hands. Check if the blade assembly can be turned clockwise a litt-
le more. Then try again. Check, if the glass jug can be turned onto the blade
assembly a little bit tighter.
10. With the mixing system, you may add further ingredients by removing the ingre-
dients cup. You should switch off the appliance, first.
Note
Switch off the motor, before adding any further ingredients to avoid splashing.
Important:
If you need to add some ingredients during operation, always use the
mixing system. Turn the selection dial to speed level 1 (“soft fruit”), then take out
the ingredients cup and slowly pour your ingredients into the opening in the lid.
Re-insert the ingredients cup, before increasing the speed.
11. After processing is done, turn the selection dial to the “OFF” position, switch off
the appliance at the power switch, wait until the motor stops, and unplug. Then
remove the processing system (see: ‘Removing the Glass Jugs after Operation’).
Do not leave the appliance unattended, when it is connected to the power sup-
ply.
12. Empty the glass jug and rinse the removable parts immediately for avoiding that
residues of food dry on the surfaces. Thereafter, clean all parts (see: ‘Cleaning
the Optional Accessories’).Removing Obstacles from the Glass Jugs
If the motor abnormally and noticeably slows down or even stalls during operation
parts of food may be blocking the knives. To maintain a long-lasting working life of
the motor, remove the obstacles in time to avoid overload.
CAUTION:
Always switch “OFF” the appliance unplug and wait for the motor
to stop, before removing the lid of the glass jug. Do not touch the knives with your
hands to avoid injuries. Do not use any hard or sharp-edged objects with the appli-
ance (e.g. metal cutlery). Do not use violence.
13. Turn the selection dial to “OFF”, switch off the appliance at the power switch.
Wait until the motor stops agitating and unplug. Remove the lid of the glass jug.
By using the provided plastic scraper or another wooden or plastic cooking uten-
sil you may try carefully to remove the obstacle. DO NOT use violence to avoid
damage to the knives.
14. If your problem persists: remove the glass jug from the motor base (see next sec-
tion). Take your food out of the glass jug for removing the blockage.
15. Before re-assuming operation, cut hard ingredients to smaller pieces (max. 2cm)
