112
system to and fro until it settles down easily on the drive rotor, coming to a sta-
ble stand on the motor base.
Important:
When mounting or dismounting the grinding system onto the motor
base, do not grasp the grinding cup. Always clasp the collar of the blade assem-
bly with both hands to avoid damage to the thread connecting the grinding
cup and blade assembly. Otherwise,
the connection could get over-tightened,
making it extremely difficulty to remove the blade assembly after grinding.
8. For fixing the grinding system to the motor base, grasp the blade assembly with
both hands by the collar and turn it clockwise to the stop. This is a little more
than a finger's breadth after feeling the first resistance. The grinding system is
now ready for operation.
CAUTION:
Please keep in mind that the motor will start operation immediate-
ly, when connecting the appliance to the power supply, while the power switch
and selection dial are in operating position. Thus,
always switch off the appli-
ance, at the selection dial and power switch, before plugging in the power
plug.
9. Ensure that the selection dial is in the “OFF” position and the power switch in the
“O” position. Then insert the power plug into an appropriate wall power outlet
.
Important:
If the rotating speed slows down continuously during operation or the
motor stalls, there may be too much food in the grinding cup, and/or there are
too many too hard ingredients blocking the knives. Switch off the appliance at
the selection dial and power switch and unplug. Remove the grinding system from
the motor base. Then remove any obstacles. If required, take out some food and
process your food in smaller portions.
Tip:
For loosening the ingredients from the knives or the inner walls of the grinding
cup, it may be sufficient to shake the grinding cup or hit the grinding cup slightly
against your palm. For this, always remove the grinding cup from the motor base.
However, do not strike the grinding cup against any hard or sharp-edged
objects!
Depending on the desired result, you may try to operate the motor in
pulses by turning the selection dial slowly to and fro several times.
Note
The appliance will process your food in some seconds. It is better to intermedia-
tely check the consistency of your food (after processing for a few seconds) than
to over-process your food.