Garmin GNS 530, Pilot'S Manual And Reference, Page: 64 / 282

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. G
4-4
SECTION 4
DIRECT-TO NAVIGATION
Selecting the Nearest Airport as a Direct-to
Destination
/ iÊ-iiVÌʈÀiV̜̇Ê7>Þ«œˆ˜ÌÊ*>}iÊ>Ü>ÞÃÊ`ˆÃ«>ÞÃÊÌ iÊ
˜i>ÀiÃÌÊ>ˆÀ«œÀÌÃÊ­vÀœ“ÊÌ iÊ«ÀiÃi˜ÌÊ«œÃˆÌˆœ˜®Êˆ˜ÊÌ iÊ ,-/Ê
field. Navigating directly to a nearby airport is always just
>ÊviÜÊȓ«iÊÃÌi«ÃÊ>Ü>Þ°ÊÊ­ i>ÀLÞÊ>ˆÀ«œÀÌÃʓ>ÞÊ>ÃœÊLiÊ
selected as direct-to destinations using the steps described
ˆ˜Ê-iV̈œ˜Ên°£°®
Selecting a nearby airport as a direct-to
destination:
1) Press the Direct-to Key. The Select Direct-to
Waypoint Page appears, with the waypoint
identifier field highlighted.
2) Turn the large
right
knob to highlight the
nearest airport (NRST) field.
3) Turn the small right knob to display a window
showing up to nine nearby airports (Figure 4-9).
Figure 4-9 Nearest Window
4) Continue turning the small
right
knob to
scroll through the list and highlight the desired
airport.
5) Press the ENT Key to confirm the selected
airport, and press the ENT Key again to activate
the direct-to function.
Shortcuts
Shortcuts are available when using the Direct-to Key,
allowing the pilot to bypass the use of the small and large
right knobs to enter the destination waypoint’s identifier.
Ê `ˆÀiVÌ‡ÌœÊ V>˜Ê LiÊ «iÀvœÀ“i`Ê vÀœ“Ê >˜ÞÊ «>}iÊ `ˆÃ«>ވ˜}Ê
>ÊȘ}iÊÜ>Þ«œˆ˜Ìʈ`i˜ÌˆwiÀÊ­ÃÕV Ê>ÃÊÌ iÊ7*/Ê«>}iÃÊvœÀÊ
>ˆÀ«œÀÌÃÊ>˜`Ê 6î°ÊʜÀÊ«>}iÃÊÌ >ÌÊ`ˆÃ«>ÞÊ>ʏˆÃÌʜvÊ
Ü>Þ«œˆ˜ÌÃÊ ­i°}°]Ê Ì iÊ i>ÀiÃÌÊ ˆÀ«œÀÌÊ *>}i®]Ê Ì iÊ `iÈÀi`Ê
waypoint must be highlighted with the cursor before
pressing the
Direct-to Key.
Selecting an on-screen waypoint as a
direct-to destination:
1) If a single airport, NAVAID, or user waypoint is
displayed on-screen (Figure 4-10):
Figure 4-10 Single Waypoint Displayed
a) Press the Direct-to Key
b) Press the ENT Key twice.