Garmin GNS 530, Pilot'S Manual And Reference, Page: 189 / 282

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. G
10-29
SECTION 10
AUX PAGES
Setup Page: COM Configuration
Setting the COM channel spacing:
1) Select ‘COM Configuration’ from the Setup
Page, using the steps described at the beginning
of this section.
2) The flashing cursor highlights the channel
spacing field (Figure 10-44). Turn the small
right knob to select the desired channel
spacing: 8.33 kHz or 25.0 kHz. Press the ENT
Key when finished.
Figure 10-44 Channel Spacing Window
Restoring Factory Settings
7 i˜Ê “>Žˆ˜}Ê V >˜}iÃÊ ÌœÊ >˜ÞÊ -iÌÕ«Ê *>}iÊ œ«Ìˆœ˜]Ê >Ê
¼,iÃ̜ÀiÊ iv>ՏÌö½Ê “i˜ÕÊ ÃiiV̈œ˜Ê >œÜÃÊ Ì iÊ «ˆœÌÊ ÌœÊ
ÀiÃ̜ÀiÊÌ iʜÀˆ}ˆ˜>Êv>V̜ÀÞÊÃiÌ̈˜}ÃÊ­vœÀÊÌ iÊÃiiVÌi`ʜ«Ìˆœ˜Ê
œ˜Þ®°ÊʜÀÊiÝ>“«i]ÊÜˆÌ ÊÌ iÊɏ>À“ÃÊ*>}iÊ`ˆÃ«>Þi`]Ê
Ì iʼ,iÃ̜ÀiÊiv>ՏÌö½Êœ«Ìˆœ˜ÊÀiÃ̜ÀiÃÊ>Ê>ˆÀë>ViÊ>>À“ÃÊ
>˜`ÊÊÃiÌ̈˜}ÃÊ̜ÊÌ iʜÀˆ}ˆ˜>Êv>V̜ÀÞÊÛ>Õið
Restoring a Setup Page option to the origi-
nal factory settings:
1) Select the desired menu option from the
Setup Page, using the steps described at the
beginning of this section.
2) Press the MENU Key to display the CDI/Alarms
Page Menu (Figure 10-45).
Figure 10-45 CDI/Alarms Page Menu
3) With ‘Restore Defaults?’ highlighted, press the
ENT
Key.