Garmin GNS 530, Pilot'S Manual And Reference, Page: 49 / 282

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. G
SECTION 3
NAV PAGES
3-13
Distance Measurements
/ iÊ ¼i>ÃÕÀiÊ ˆÃ̶½Ê œ«Ìˆœ˜Ê «ÀœÛˆ`iÃÊ >Ê µÕˆVŽ]Ê i>ÃÞÊ
method for determining the bearing and distance between
>˜ÞÊÌܜʫœˆ˜ÌÃʜ˜ÊÌ iÊ>«ÊˆÃ«>Þ°
Measuring bearing and distance between
two points:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Measure Dist?’ (Figure 3-21).
Figure 3-21 Map Page Menu
2) Press the ENT Key, an on-screen reference
pointer appears on the Map Display at the
present position.
3) Turn the small and large right knobs to place
the reference pointer at the desired location to
measure FROM and press the
ENT
Key (Figure
3-22).
Figure 3-22 Using Pointer to Measure Distance and Bearing
4) Again, use the small and large
right
knobs
to place the reference pointer at the desired
location to measure TO. The bearing and
distance from the first reference location
appears at the top of the Map Display.
5) To exit the ‘Measure Dist?’ option, press the
small
right
knob.
Adding Data Fields to the Map
/ iʼ>Ì>ʈi`ÃÊ"˜¶½Êœ«Ìˆœ˜Ê«ÀœÛˆ`iÃÊ>Ê>«ÊˆÃ«>ÞÊ
­ˆ}ÕÀiÊ·ÓήÊÜˆÌ ÊwÛiÊÕÃiÀ‡ÃiiVÌ>LiÊ
data fields along the
right-hand side of the screen. Select this option to display
additional on-screen data such as destination waypoint
˜>“iÊ ­7*/®]Ê `iÈÀi`Ê ÌÀ>VŽÊ ­/®]Ê }ÀœÕ˜`ÌÀ>VŽÊ ­/,®]Ê
`ˆÃÌ>˜ViÊ̜Ê`iÃ̈˜>̈œ˜Ê­-®]Ê>˜`Ê}ÀœÕ˜`Êëii`Ê­-®°ÊÊvÊ
this option has been selected and the data fields are being
`ˆÃ«>Þi`]ʼ>Ì>ʈi`ÃÊ"vv¶½Ê>««i>ÀÃÊ>ÃÊ>˜Êœ«Ìˆœ˜Êˆ˜ÃÌi>`°
Figure 3-23 Map Display with Data Fields On
To turn the data fields off/on:
From the Map Page Menu, turn the large right
knob to highlight ‘Data Fields On?’ (or ‘Data
Fields Off?’) and press the
ENT Key.