Garmin GNS 530, Pilot'S Manual And Reference, Page: 160 / 282

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. G
9-4
SECTION 9
VLOC RECEIVER
6) Turn the large
right
knob to highlight ‘Load?’
or ‘Activate?’ (Figure 9-7) and press the ENT
Key. (‘Load?’ adds the procedure to the
flight plan without immediately using it for
navigation guidance. This allows the pilot to
continue navigating the original flight plan, but
keeps the procedure available on the Active
Flight Plan Page for quick activation when
needed.)
Figure 9-7 Highlight ‘Load?’
7) For VOR and ILS approaches, the standby field
of the VLOC Window is automatically tuned to
the proper frequency. To activate the frequency
press the
VLOC Flip-flop Key. To display VLOC
course information on the external CDI (or
HSI) press the
CDI Key and verify that ‘VLOC’
is displayed at the bottom left corner of the
screen, directly above the
CLR
Key.
8) For precision approaches and some non-
precision approaches, a reminder window
appears indicating that GPS guidance on such
approaches is strictly for monitoring only—use
the VLOC receivers and external CDI (or HSI) for
primary navigation. To confirm this reminder,
highlight ‘Yes?’ and press the
ENT Key.
CDI Key
The GNS 530’s CDI
Ê iÞÊ ˆÃÊ ÕÃi`Ê ÌœÊ VœÕ«iÊ Ì iÊ *-Ê
œÀÊ6"ÊÀiViˆÛiÀÊ̜ÊÌ iÊiÝÌiÀ˜>ÊÊ­œÀÊ-®°ÊÊ7 i˜Ê
Ì iÊ iÝÌiÀ˜>Ê Ê ­œÀÊ -®Ê ˆÃÊ Liˆ˜}Ê `ÀˆÛi˜Ê LÞÊ Ì iÊ *-Ê
ÀiViˆÛiÀ]Ê ¼*-½Ê >««i>ÀÃÊ >ÌÊ Ì iÊ LœÌ̜“Ê ivÌÊ VœÀ˜iÀÊ œvÊ Ì iÊ
page, directly above the CDI
ÊiÞ°ÊÊ7 i˜ÊÌ iÊiÝÌiÀ˜>ÊÊ
­œÀÊ -®Ê ˆvÊ Liˆ˜}Ê `ÀˆÛi˜Ê LÞÊ Ì iÊ 6"Ê ÀiViˆÛiÀ]Ê ¼6"½Ê
appears instead.
/œÊVœÕ«iÊÌ iÊiÝÌiÀ˜>ÊÊ­œÀÊ-®Ê̜ÊÌ iÊ*-ÊÀiViˆÛiÀÊ
œÀÊ6"ÊÀiViˆÛiÀ]Ê«ÀiÃÃÊÌ iÊ
CDI
ÊiÞÊ̜Ê`ˆÃ«>Þʼ*-½ÊœÀÊ
¼6"½]Ê>ÃÊ`iÈÀi`Ê­ˆ}ÕÀiʙ‡n®°
Figure 9-8 GPS and VLOC Annunciators
‘GPS’ Annunciator ‘VLOC’ Annunciator
NOTE: The external CDI (or HSI) must be coupled
to the VLOC receiver for approaches which are
not approved for GPS. See ILS example in Section
6.3.