Garmin GNS 530 Pilot'S Manual And Reference Download Page 238

Page: 238 / 282

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. G

14-22

SECTION 14

ADDITIONAL FEATURES

/iÊ /,Ê ,iµÕiÃÌÊ *>}iÊ >ÃÊ ÌiÊ vÜ}Ê ÕÃiÀ

selectable fields:

UÊ À>ÌÊÊ/ÃÊwi`ÊÃÊÕÃi`ÊÌÊÃiiVÌÊLiÌÜiiÊ

ÀiµÕiÃÌ}ÊÌiÊÀ>ÜÊ/,ÊÌiÝÌÊ/iÝÌÕ>®ÊÀÊ
ÀiµÕiÃÌ}Ê>Ê}À>«V>ÊÃÕ>ÀÞÊÀ>«V®ÊvÊ
ÃiÛiÀ>Ê/,-°

NOTE: Textual METARS can only be requested
by identifier or by flight plan (if the flight plan
contains a METAR station identifier).

Center - This field allows the pilot to specify

reference points for the request. The following

wÛiÊ«ÌÃÊ>ÀiÊ>Û>>LiÊvÀÊÌiÊ¼iÌiÀ½Êwi`\Ê

♦

ÊÕÀÀiÌÊ*ÃÌÊÊ,iµÕiÃÌÊ/,Ê`>Ì>ÊvÀÊ

the aircraft’s current position.

♦

ÊÊi>`ÊÊ,iµÕiÃÌÊ/,Ê`>Ì>Ê>i>`ÊvÊ

Ê >}®ÊÌiÊVÕÀÀiÌÊÀÕÌi°

♦

ÊÀÊÊÊ,iµÕiÃÌÊ 8,Ê`>Ì>ÊvÀÊ>Ê

Ê Ã«iVwVÊÜ>Þ«ÌÊ`iÌwiÀ°ÊÊvÊ¼ÀÊ½ÊÃÊ

selected as the reference point for the request,

Ê ÌiÊ¼7*/½Êwi`ÊÃÊ`Ã«>Þi`ÊÊ«>ViÊvÊ

Ê ¼*ÃÌ½®°ÊÊ/iÊ¼7*/½Êwi`ÊÃÊÕÃi`ÊÌÊiÌiÀÊ>Ê

waypoint identifier as the reference point for
the request.

♦

ÊÀÊ>ÌÉÊÊ,iµÕiÃÌÊ 8,Ê`>Ì>ÊvÀÊ

a specific latitude and longitude. This is only
selectable when requesting from the map. The

Ê ¼*ÃÌ½Êwi`Ê`Ã«>ÞÃÊÌiÊ«ÃÌÊvÊÌiÊ>«Ê

cursor and cannot be edited.

♦

ÊÀÊ}ÌÊ*>ÊÊ,iµÕiÃÌÊ/,Ê`>Ì>ÊvÀÊ

one of the waypoints in the active flight plan.
This is only selectable when an active Flight

Ê *>Ê>ÃÊLiiÊÃiiVÌi`°ÊÊ/iÊ¼}ÌÊ*>½Êwi`Ê

Ê `Ã«>Þi`ÊÊ«>ViÊvÊ¼*ÃÌ½®ÊÃÊÕÃi`ÊÌÊÃiiVÌÊ

which waypoint in the active flight plan to use
as the reference point for the request.

Ê ,>`ÕÃÊÀ>«V>ÊÀiµÕiÃÌÃÊÞ®ÊÊ/ÃÊwi`Ê

ÃiiVÌÃÊ>ÊÀiµÕiÃÌÊÀ>`ÕÃÊvÀÊxäÊÌÊÓxäÊ>ÕÌV>Ê

miles from the selected position.

Ê *ÃÌÊ>ÃÊ7*/ÊÀÊ}ÌÊ*>®ÊÊ¼ÕÀÀiÌÊ

*Ã½*ÃÌÊÃÊVÕÀÀiÌ]Ê¼Êi>`½*ÃÌÊÃÊ
Ê>i>`Ê«ÃÌ°ÊÊ¼ÀÊ½*ÃÌÊÃÊvÀÊ
ÌiÊÊiÌiÀi`ÊÌÊÌiÊ7*/Êwi`°ÊÊ¼}ÌÊ*>½ÊÃÊ
ÌiÊÊÃiiVÌi`ÊvÀÊÌiÊ>VÌÛiÊy}ÌÊ«>°

Ê ÕÌÊ,iµÕiÃÌÊÊ{Ê"Þ®ÊÊ/ÃÊwi`ÊÃÊ

ÕÃi`ÊÌÊÃiÌÊÌiÊÌiÊÌiÀÛ>ÊvÀÊÌiÊÊ{ÊÌÊ
>ÕÌ>ÌV>ÞÊÃi`Ê>Ê 8,Ê`>Ì>ÊÀiµÕiÃÌ°ÊÊ/iÊ
ÌiÊ«ÌÃÊ>ÀiÊ"]Ê£äÊ]Ê£xÊ]ÊÓäÊ]ÊÎäÊ
]Ê{xÊ]Ê>`Ê£ÊÕÀ°ÊÊ7iÊ>Ê>ÕÌÊÀiµÕiÃÌÊ

time is selected, the first request is sent after the
specified time has elapsed from when the field

Ü>ÃÊÃiÌÊ>ÃÊ««Ãi`ÊÌÊi`>ÌiÞÊÃi`}Ê>Ê
ÀiµÕiÃÌ®°

NOTE: It is recommended that the pilot turn the
Auto Request function ‘on’ by setting it to ‘10 min’
updates. This setting provides best performance
for the GDL 49.

Ê /iÊ¼>Õ>Ê-i`¶½Ê{®ÊÀÊ¼1«`>ÌiÊ,iµÕiÃÌ¶½Ê

ÊÈ®Êwi`ÊÃÊÕÃi`ÊÌÊÀiµÕiÃÌÊ/,Ê>Ì>°

Use the small and large

right

knobs to select

the desired data and the

ENT

Key to enter the

data into the appropriate fields on the METAR
Request Page.

Select ‘Manual Send?’ or ‘Update Request?’
and press the

ENT

Key. The request has been

sent. Note that selecting ‘Auto Request’
and pressing the

ENT

Key does not send the

request until after the auto time period.

To exit from the NEXRAD Request Page, press
the small

right

knob. The Data Link Page is

displayed.

Summary of Contents for GNS 530



























































































































































































































































































Search results

Summary of Contents for GNS 530

Reviews:

Garmin GNS 530, Pilot'S Manual And Reference, Page: 238 / 282

Search results

Summary of Contents for GNS 530

Reviews: