Garmin G3X Touch, Pilot'S Manual

Page: 45 / 470

Garmin G3X Pilot’s Guide 190-01115-00 Rev. K
23
System Overview
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
• Multi-Display (Reversionary Mode)
If the system detects a failure in PFD1, the MFD enters reversionary mode. If the
MFD fails, PFD1 and PFD2 enter reversionary mode. A failure of PFD2 is not considered
an emergency and will not cause either of the remaining displays to enter reversionary
mode.
PFD DISPLAY CONFIGURATION
If the system is configured for multiple GDUs, the pilot has the ability to change the
layout of PFD1 between full-screen and split-screen in normal mode.
Changing the PFD1 Display Layout:
1)
Press the
MENU
Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight ‘System Setup...’ and press the
ENT
Key.
3) Turn or move the FMS Joystick to highlight ‘Display’, and press the ENT
Key.
4) Move the FMS Joystick to highlight the PFD Display Layout field.
5)
Turn the
FMS
Joystick to highlight ‘Auto’ or ‘Split’.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
Changing the PFD2 Display Layout:
If the system is configured for multiple GDUs, the pilot has the ability to change the
layout of PFD2 between full-screen PFD, split-screen, or full-screen PFD/MFD.
1)
Press the MENU Key twice to display the Main Menu.
2)
Turn or move the
FMS
Joystick to highlight ‘System Setup...’ and press the
ENT Key.
3)
Turn or move the
FMS
Joystick to highlight ‘Display’, and press the
ENT
Key.
4)
Move the
FMS
Joystick to highlight the PFD2 Display Layout field.
5)
Turn the FMS Joystick to highlight ‘Auto’, ‘Split’, or ‘PFD/MFD’.
6)
Press the
FMS
Joystick, the
CLR
Key, the
EXIT
Softkey or the
MENU
Key to
return to the previous page.