Garmin G3X Touch, Pilot'S Manual

Page: 234 / 470

Garmin G3X Pilot’s Guide 190-01115-00 Rev. K
212
Hazard Avoidance
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
DATA LINK WEATHER (FIS-B)
The GDL 39 is a receive-only data link radio with on-board GPS, 978 MHz (the Universal
Access Transceiver frequency band), and 1090 MHz Extended Squitter (1090 ES) receivers.
It is designed to receive, process, and output traffic (ADS-B air-to-air, and TIS-B traffic
information), and weather (Flight Information Service-Broadcast (FIS-B)) information to the
G3X system through an RS-232 serial connection. As a UAT receiver, the GDL 39 can
receive and, when connected to the G3X, display Flight Information Service-Broadcast
(FIS-B) weather products as well as traffic.
FIS-B is a subscription-free weather service that is broadcast by Ground Based Transceivers
(GBTs) over the 978 MHz UAT frequency band as part of the FAA’s Next Generation Air
Transportation System (NextGen). To receive FIS-B weather information, the GDL 39 must be
within range and line-of-sight of an operating GBT. Reception may be affected by altitude,
terrain, and other factors. GDL 39-supported FIS-B weather products include METARs,
TAFs, NEXRAD (Regional and CONUS (Combined)), AIRMETs, SIGMETs, PIREPs, and Winds
and Temperatures Aloft. Other products include NOTAMs and TFRs. Only one display in a
multiply-display installation may be configured to show FIS-B weather information. It is
recommended that the GDL 39 be connected to the MFD in a multiple-display system.
Switching Weather Sources:
1)
Press the MENU Key twice to display the Main Menu.
2)
Turn or move the
FMS
Joystick to highlight ‘System Setup...’ and press the
ENT Key.
3)
Turn or move the
FMS
Joystick to highlight ‘WEATHER’.
4) Press the ENT Key.
5)
Turn or move the
FMS
Joystick to select the desired weather source (AUTO,
XM, or GDL FIS-B). The default is ‘AUTO’ which will use XM over GDL FIS-B
if both are available.
6) Press the FMS Joystick, the CLR Key, or the EXIT Softkey to return to the
previous page.
Or
1)
From the Weather Page press
SETUP
Softkey.
2) Turn or move the FMS Joystick to select the desired weather source (AUTO,
XM, or GDL FIS-B). The default is ‘AUTO’ which will use XM over GDL FIS-B
if both are available.