78
AQUAMAP™ 10x2/12x2 SERIES
Viewing Video
Before you can view video, you must connect to a compatible source.
Compatible devices include video devices connected to the ports on the
AQUAMAP or to the Garmin Marine Network, as well as supported network
(IP-based) video cameras, encoders, and thermal cameras.
Select
A/V, Gauges, Controls
>
Video
.
Selecting a Video Source
1
From the video screen, select
MENU
>
Source
.
2
Select the source of the video feed.
Alternating Among Multiple Video Sources
If you have two or more video sources, you can alternate between them using
a specific time interval.
1
From the video screen, select
MENU
>
Source
>
Alternate
.
2
Select
Time
, and select the amount of time each video appears.
3 S
elect
Source
, and select the video sources to add to the alternating
sequence.
Networked Video Devices
NOTICE
A Garmin Power over Ethernet (PoE) Isolation Coupler (P/N 010-10580-10)
must be used when connecting a PoE device, such as a FLIR
®
camera, to
a Garmin Marine Network. Connecting a PoE device directly to a Garmin
Marine Network AQUAMAP damages the Garmin AQUAMAP and may
damage the PoE device.
Before you can view and control video devices such as IP cameras,
encoders, and thermal cameras using your AQUAMAP, you must have a
compatible video device connected to your AQUAMAP, and you must have
a marine network cable Power over Ethernet (PoE) isolation coupler. Go to
for a list of compatible devices or to purchase a PoE Isolation
Coupler.
You can connect multiple supported video cameras and up to two video
encoders to the Garmin Marine Network. You can select and view up to four
video sources at once.
AQUAMAPs with multiple composite built-in video inputs can display a single
built-in video input only. When the cameras are connected, the network
detects them automatically and displays them in the source list.
Using Video Presets on Networked Video Cameras
You can save, name, and activate video presents for each networked video
source.
Saving Video Presets on a Networked Video Camera
1
From a video screen, touch the screen. The video controls appear on the
screen.
2
Hold a video preset button.
A green light indicates the setting is stored.