95
AQUAMAP™ 10x2/12x2 SERIES
Rotating the GRID Joystick
For certain installation situations, you can rotate the orientation of the GRID
joystick.
1
Select
Settings
>
Communications
>
Marine Network
.
2
Select the GRID device.
Cleaning the Screen
NOTICE
Cleaners containing ammonia will harm the anti-reflective coating.
The device is coated with a special anti-reflective coating which is very
sensitive to waxes and abrasive cleaners.
1
Apply an eyeglass lens cleaner specified as safe for anti-reflective
coatings to the cloth.
2
Gently wipe the screen with a soft, clean, lint-free cloth.
Viewing Images on a Memory card
You can view images that are saved on a memory card.
You can view .jpg, .png, and .bmp files.
1
Insert a memory card with image files into the card slot.
2
Select
NAV INFO
>
Image Viewer
.
3
Select the folder containing the images.
4
Wait a few seconds for the thumbnail images to load.
5
Select an image.
6
Use the arrows to scroll through the images.
7
If necessary, select
MENU
>
Start Slideshow
.
Screenshots
You can capture a screenshot of any screen shown on your AQUAMAP as a
Digital Switching
Your AQUAMAP can be used to monitor or control circuits when a compatible
system is connected.
For example, you can control the interior lights and navigation lights on the
vessel. You can also monitor live well circuits.
To access the digital switching controls, select
NAV INFO
>
Circuit Control
.
For more information about purchasing and configuring a digital switching
system, contact your Garmin dealer.
Pairing the GRID Remote Input Device with the
AQUAMAP
Before you can use a GRID remote input device with the AQUAMAP, you
must pair the devices.
You can initiate the paring of the devices from the AQUAMAP or from the
GRID remote input device.
Pairing the GRID Device with the AQUAMAP from the AQUAMAP
1
Select
Settings
>
System
>
Station Information
>
GRID™ Pairing
>
Add
.
2
On the GRID remote input device, press
SELECT
.
Pairing the GRID Device with the AQUAMAP from the GRID
Device
1
On the GRID remote input device, press
+
and
HOME
at the same time.
A selection page opens on all of the AQUAMAPs on the Garmin Marine
Network.
2
Rotate the wheel on the GRID remote input device to highlight
SELECT
on the AQUAMAP you want to control with the GRID remote input device.
3
Press
SELECT
.
