Garmin AQUAMAP 10x2 Series Owner'S Manual Download

Page: 69 / 112

AQUAMAP™ 10x2/12x2 SERIES

network. If a heading sensor is not available, the boat heading is based on

GPS tracking data.
GPS tracking data indicates the direction in which the boat is moving, not

the direction in which the boat is pointing. If the boat is drifting backward or

sideways due to a current or wind, the Radar overlay may not perfectly align

with the chart data. This situation should be avoided by using boat- heading

data from an electronic compass.
If the boat heading is based on data from a magnetic heading sensor or an

automatic pilot, the heading data could be compromised due to incorrect

setup, mechanical malfunction, magnetic interference, or other factors. If the

heading data is compromised, the Radar overlay may not align perfectly with

the chart data.

Echo Trails

The echo trails feature enables you to track the movement of vessels on the

radar display. As a vessel moves, you can see a faint trail

of the vessel’s

wake. You can change the length of time the trail is displayed

NOTE:

Depending on the radar in use, the settings configured for use in one

radar mode may or may not be applied to other radar modes or to the radar

overlay.

NOTE:

This feature is not available on xHD open array or HD/HD+ radome

models.

Turning on Echo Trails

From a radar screen, select

MENU

Radar Options

Echo Trails

Display

Adjusting the Length of the Echo Trails

From a radar screen or the radar overlay, select

MENU

Radar Options

Echo Trails

Time

Select the length of the trail.

Clearing the Echo Trails

You can remove the echo trails from the radar screen to reduce the clutter on

the screen.

From a radar screen, select

MENU

Radar Options

Echo Trails

Clear Trails

Optimizing the Radar Display

You can adjust the radar display settings for reduced clutter and increased

accuracy.

NOTE:

You can optimize the radar display for each radar mode.

NOTE:

Depending on the radar in use, the setting configured for use in one

radar mode may or may not be applied to other radar modes or to the Radar

overlay.

Adjusting Gain on the Radar Screen Automatically

The automatic gain setting for each radar mode is optimized for that mode,

and may differ from the automatic gain setting used for another mode.

NOTE:

Not all options are available on all radar models.

From a radar screen or the radar overlay, select

MENU

Gain

Select an option:

• To adjust the gain automatically for changing conditions, select

Auto

Summary of Contents for AQUAMAP 10x2 Series

















































































































Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands

Garmin AQUAMAP 10x2 Series, Owner'S Manual

Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands