Garmin AQUAMAP 10x2 Series, Owner'S Manual

Page: 62 / 112

52
AQUAMAP™ 10x2/12x2 SERIES
alarm.
1 From the FrontVü sonar view, select MENU > FrontVü Alarm .
2 Select On .
3 Enter the depth at which the alarm is triggered, and select Done .
On the FrontVü screen, a depth line shows the depth at which the alarm is
set. The line is green when you are in a safe depth. The line turns yellow
when you are going faster than the forward range gives you time to react
(10 seconds). It turns red and sounds an alarm when the system detects an
obstruction or the depth is less than the entered value.
CAUTION
The ability to effectively avoid running aground with FrontVü sonar decreases
as your speed rises above 8 knots.
RealVü Appearance Settings
From a RealVü sonar view, select MENU > Sonar Setup > Appearance .
Point Colors : Selects the color palette.
Bottom Colors : Sets the color of the bottom to either one of the color palette,
or a brown color.
Bottom Style : Sets the style for the bottom. When you are in deep water,
you can select the Points option and manually set the range to a shallower
value.
Color Key : Shows a legend of the depths the colors represent.
LiveVü and FrontVü Appearance Settings
From a LiveVü or FrontVü Panoptix sonar view, select MENU > Sonar Setup
> Appearance .
Color Scheme : Sets the color palette.
Color Gain : Adjusts the intensity of colors shown on the screen. You
can select a higher color gain value to see targets higher in the water
column. A higher color gain value also allow you to differentiate low
intensity returns higher in the water column, but this causes a loss in the
differentiation of the returns at the bottom. You can select a lower color
gain value when targets are near the bottom, to help you distinguish
between targets and high intensity returns such as sand, rock, and mud.
Trails : Sets the how long the trails appear on the screen. The trails show the
movement of the target.
Bottom Fill : Colors the bottom brown to distinguish it from the water returns.
Grid Overlay : Shows a grid of range lines.
Scroll History : Shows the sonar history in a traditional sonar view.
RealVü Appearance Settings
From a RealVü sonar view, select MENU > Sonar Setup > Appearance .
Point Colors : Sets a different color palette for the sonar return points.
Bottom Colors : Sets the color scheme for the bottom.
Bottom Style : Sets the style for the bottom. When you are in deep water,
you can select the Points option and manually set the range to a shallower
value.
Color Key : Shows a legend of the depths the colors represent.
Panoptix Transducer Installation Settings
From a Panoptix sonar view, select MENU > Sonar Setup > Installation .
Install Depth : Sets the depth below the water line where the Panoptix
transducer is mounted. Entering the actual depth at which the transducer
is mounted results in a more accurate visual presentation of what is in the
water.
Bow Offset : Sets the distance between the bow and the forward view
Panoptix transducer installation location. This allows you to view the
forward distance from the bow instead of the transducer location. This
applies to Panoptix transducers in the FrontVü, LiveVü Forward, and