Garmin AQUAMAP 10x2 Series Owner'S Manual Download

Page: 13 / 112

AQUAMAP™ 10x2/12x2 SERIES

Insert the memory card

Press the card in until it clicks.

Close the door.

Software Update

You may need to update the device software when you install the device or

add an accessory to the device.
Before you update the software, you can check the software version installed

on your device. Then, you can go to

Garmin.com/support/software/marine.

html

, select See All Devices in this Bundle, and compare the installed

software version to the software version listed for your product.
If the software on your device is older than the one listed on the website,

follow the steps to load the software on a memory card, and then update the

device software.

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a computer that

is running Windows

software.

NOTE:

You can contact Garmin customer support to order a preloaded

software update card if you do not have a computer with Windows software.

Insert a memory card into the card slot on the computer.

Go to

Garmin.com/support/software/marine.html

TIP:

You can also download updated owner’s manuals to load on the

AQUAMAP from this web page.

Select

GPSMAP Series with SD Card

Select

Download

next to

GPSMAP Series with SD Card

Read and agree to the terms.

Select

Download

Choose a location, and select

Save

Double-click the downloaded file.

A Garmin folder containing the software update is created in the selected

location. A dialog box opens to assist in transferring the software update to

a memory card.

Select

Next

Select the drive associated with the memory card, and select

Next

Finish

A Garmin folder containing the software update is created on the memory

card. The software update can take several minutes to load onto the memory

card.

Updating the Device Software

Turn on AQUAMAP.

After the home screen appears, insert the memory card into the card slot.

NOTE:

In order for the software update instructions to appear, the device

must be fully booted before the card is inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process completes.

When prompted, leave the memory card in place and restart AQUAMAP

manually.

Remove the memory card.

Summary of Contents for AQUAMAP 10x2 Series

















































































































Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands

Garmin AQUAMAP 10x2 Series, Owner'S Manual

Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands