Garmin AQUAMAP 10x2 Series Owner'S Manual Download

Page: 66 / 112

AQUAMAP™ 10x2/12x2 SERIES

The moving targets are color-coded so you can tell at a glance which targets

are heading your way and which are heading away from you. On most

color schemes, green indicates the target is moving away from you and red

indicates the target is moving toward you.

Enabling a Guard Zone

You can enable a guard zone to alert you when anything comes within a

specified area around your boat.

NOTE:

This feature is not available in dual radar modes.

From a radar screen, select

MENU

Radar Options

Enable Guard

Zone

Defining a Circular Guard Zone

Before you can define the boundaries of the guard zone, you must enable a

guard zone.

You can define a circular guard zone that completely surrounds your boat.

From a radar screen, select

MENU

Radar Options

Adjust Guard

Zone

Adjust Guard Zone

Circle

Select the location of the outer guard zone circle.

Select the location of the inner guard zone circle to define the width of the

guard zone.

Defining a Partial Guard Zone

You can define the boundaries of a guard zone that does not completely

surround your boat.

From a radar screen, select

MENU

Radar Options

Adjust Guard

Zone

Adjust Guard Zone

Corner 1

Select the location of guard-zone corner

Select

Corner 2

Select the location of guard-zone corner

to define the width of the

guard zone.

Select

Done

Disabling a Guard Zone

You can disable a guard zone.

From a radar screen, select

MENU

Radar Options

Adjust Guard

Zone

Disable Guard Zone

The guard zone configuration is saved, so you can enable it again when

needed.

MARPA

Mini-automatic radar plotting aid (MARPA) enables you to identify and track

targets and is primarily used for collision avoidance. To use MARPA, you

assign a MARPA tag to a target. The radar system automatically tracks the

Summary of Contents for AQUAMAP 10x2 Series

















































































































Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands

Garmin AQUAMAP 10x2 Series, Owner'S Manual

Search results

Summary of Contents for AQUAMAP 10x2 Series

Reviews:

Related manuals for AQUAMAP 10x2 Series

Brands by name

Popular brands