68
AQUAMAP™ 10x2/12x2 SERIES
Editing Information in a Position Report
1
Select
NAV INFO
>
DSC List
.
2
Select a position-report call.
3
Select
Review
>
Edit
.
• To enter the name of the vessel, select
Name
.
• To select a new symbol, select
Symbol
, if available.
• To enter a comment, select
Comment
.
• To show a trail line for the vessel if your radio is tracking the position of
the vessel, select
Trail
.
• To select a color for the trail line, select
Trail Line
.
Deleting a Position-Report Call
1
Select
NAV INFO
>
DSC List
.
2
Select a position-report call.
3
Select
Review
>
Clear Report
.
Viewing Vessel Trails on the Chart
You can view trails for all tracked vessels on some chart views. By default,
a black line indicates the path of the vessel, a black dot indicates each
previously reported position of a tracked vessel, and a blue flag indicates the
last reported position of the vessel.
1
From a chart or 3D chart view, select
MENU
>
Chart Setup
>
Other
Vessels
>
DSC
>
Display Setup
.
2
Select the number of hours to show tracked vessels on the chart.
For example, if you select 4 Hours, all trail points that are less than four
hours old appear for all tracked vessels.
Individual Routine Calls
When you connect the AQUAMAP to a Garmin VHF radio, you can use the
AQUAMAP interface to set up an individual routine call.
When setting up an individual routine call from your AQUAMAP, you can
select the DSC channel on which you want to communicate. The radio
transmits this request with your call.
Selecting a DSC Channel
NOTE:
The selection of a DSC channel is limited to those channels that are
available in all frequency bands. The default channel is 72. If you select a
different channel, the AQUAMAP uses that channel for subsequent calls until
you call using another channel.
1
Select
NAV INFO
>
DSC List
.
2
Select a vessel or a station to call.
3
Select
Review
>
Call with Radio
>
Channel
.
4
Select an available channel.
Making an Individual Routine Call
NOTE:
When initiating a call from the AQUAMAP, if the radio does not have
an MMSI number programmed, the radio will not receive call information.
1
Select
NAV INFO
>
DSC List
.
2
Select a vessel or a station to call.
3
Select
Review
>
Call with Radio
.
4
If necessary, select
Channel
, and select a new channel.
5
Select
Send
.
The AQUAMAP sends information about the call to the radio.
6
On your Garmin VHF radio, select
Call
.
Making an Individual Routine Call to an AIS Target
1
From a chart or 3D chart view, select an AIS target.
2
Select
AIS Vessel
>
Call with Radio
.
