15
AQUAMAP™ 10x2/12x2 SERIES
From a chart or 3D chart view, select
MENU
>
Chart Appearance
or
MENU
>
Chart Setup
>
Chart Appearance
.
Orientation
: Sets the perspective of the map.
Detail
: Adjusts the amount of detail shown on the map, at different zoom
levels.
Heading Line
: Shows and adjusts the heading line, which is a line drawn on
the map from the bow of the boat in the direction of travel, and sets the
data source for the heading line.
Panoptix Area
: Shows and hides the area being scanned by the Panoptix™
transducer. The attitude and heading reference system (AHRS) must be
calibrated use this feature.
World Map
: Uses either a basic world map or a shaded relief map on the
chart. These differences are visible only when zoomed out too far to see
the detailed charts.
Shallow Shading
: Sets the shades from the shoreline to the specified depth.
Depth Shading
: Specifies an upper and lower depth to shade between.
Spot Depths
: Turns on spot soundings and sets a dangerous depth. Spot
depths that are equal to or more shallow than the dangerous depth are
indicated by red text.
Symbols
: Shows and configures the appearance of various symbols on
the chart, such as the vessel icon, navaid symbols, land POIs, and light
sectors.
Inset Map
: Shows a map zoomed in on the vessel’s location in the corner of
the main map.
Style
: Sets how the chart appears over 3D terrain.
Hazard Colors
: Shows shallow water and land with a color scale. Blue
indicates deep water, yellow is shallow water, and red is very shallow
water.
Preferred Depth
: Sets the appearance of a safe depth for the Mariner’s Eye
3D chart view.
NOTE:
This setting affects only the appearance of hazard colors for the
Mariner’s Eye 3D chart view. It does not affect the safe water depth Auto
Guidance setting or the sonar shallow water alarm setting.
Range Rings
: Shows and configures the appearance of range rings, which
help you to visualize distances in some chart views.
Lane Width
: Specifies the width of the navigation lane, which is the magenta
line in some chart views that indicates the course to your destination.
Laylines Settings
To use the laylines features, you must connect a wind sensor to the
AQUAMAP.
When in sailing mode, you can display laylines on the Nav. chart. Laylines
can be very helpful when racing.
From the Nav. chart, select
MENU
>
Sailing
>
Laylines
.
Display
: Sets how the laylines and vessel appear on the chart, and sets the
length of the laylines.
Sailing Ang.
: Allows you to select how the device calculates laylines. The
Actual option calculates the laylines using the measured wind angle from
the wind sensor. The Manual option calculates the laylines using manually
entered windward and leeward angles.
